The following for use in the repair of road tractors for semi-trailers, motor vehicles for the transport of ten or more persons (including the driver), ambulances and hearses, motor vehicles for the transport of goods, or fire fighting vehicles, and chassis therefor, or for use in the manufacture of repair parts thereof: Axles, front and rear; Bell or clutch housings for vehicles having a g.v.w. exceeding 8.845 tonnes; Brakes, other than brakes ranging in size from 381 mm by 76.2 mm to 419.1 mm by 177.8 mm, and air and hydraulic brakes for current model service of vehicles having a capacity not exceeding 1.82 tonnes; Brake drums or linings; Cast aluminum road wheels for tube type tires using rim sizes exceeding 508 mm by 203.2 mm or for tubeless type tires using rim sizes exceeding 571.5 mm by 209.55 mm; Clutches, other than single plated clutches of a diameter not exceeding 330.2 mm; Continuous control or constant velocity half-shaft drive shafts; Hubs; Hydraulic or fluid couplings, other than for motor vehicles for the transport of goods; Internal combustion engines with a piston displacement exceeding 5,703.7 cm³; Linkages and controls for use with clutches, transmission assemblies, power dividers or transfer cases; Magnetos; Power dividers or transfer cases; Rims for pneumatic tires exceeding 508 mm by 190.5 mm for tube type tires, or exceeding 571.5 mm by 171.45 mm for tubeless tires; Steel road wheels of a diameter exceeding 622.3 mm; Steering drag links for vehicles having a g.v.w. of 9.072 tonnes or more; Steering gears; Tandem axle suspensions, excluding springs, other than for current models of motor vehicles for the transport of goods; Transmission assemblies; Parts of the foregoing, other than: Axle housings and sintered powdered metal parts, for transmission assemblies; Axle shafts for vehicles having a g.v.w. not exceeding 8.845 tonnes; Brake shoe assembly kits; Idler arms, tie rod assemblies and tie rod ends, for steering drag links of vehicles having a g.v.w. exceeding 9.072 tonnes; Timing chains for internal combustion engines with a piston displacement exceeding 5,703.7 cm³.
- Code
- 9963.00.00
- Level
- 8 digits
- MFN rate
- En fr.
An empty cell means the treatment does not apply to these goods — not that they enter free under it. Entitlement to a preferential treatment depends on origin and on the proof you hold.
Base rates
- NPF
- En fr.
- Tarif général
- 35 %
Most-Favoured-Nation Tariff: the default rate for goods originating in a country entitled to it.
General Tariff: the residual rate, applied to goods originating in a country entitled to no other tariff treatment.
Trade agreements
- TAU
- —
- TNZ
- —
- TÉU
- En fr.
- TMX
- En fr.
- TACI
- En fr.
- TC
- En fr.
- TCR
- En fr.
- TI
- En fr.
- TN
- En fr.
- TSL
- En fr.
- TP
- En fr.
- TCOL
- En fr.
- TJ
- En fr.
- TPA
- En fr.
- THN
- En fr.
- TKR
- En fr.
- TCUE
- En fr.
- TUA
- En fr.
- TPTGP
- En fr.
- TUK
- En fr.
Australia Tariff.
New Zealand Tariff.
United States Tariff, under CUSMA. The European Union rate is TCUE, not this column.
Mexico Tariff, under CUSMA.
Canada-Israel Free Trade Agreement Tariff.
Chile Tariff.
Costa Rica Tariff.
Iceland Tariff, under the EFTA agreement.
Norway Tariff, under the EFTA agreement.
Switzerland-Liechtenstein Tariff, under the EFTA agreement.
Peru Tariff.
Colombia Tariff.
Jordan Tariff.
Panama Tariff.
Honduras Tariff.
Korea Tariff.
Canada-European Union Tariff, under CETA.
Ukraine Tariff.
Comprehensive and Progressive Trans-Pacific Partnership (CPTPP) Tariff. Distinct from TPAC, which covers the Commonwealth Caribbean countries.
United Kingdom Tariff.
Preference programmes
- TPAC
- En fr.
- TPDM
- En fr.
- TPG
- En fr.
Commonwealth Caribbean Countries Tariff: a unilateral preference programme, not to be confused with CPTPP (TPTGP).
Least Developed Country Tariff: a unilateral preference programme, more favourable than the General Preferential Tariff.
General Preferential Tariff: a unilateral preference programme granted to eligible developing countries.
The full detail of this code,
in your workspace.
Explanatory notes and classification rulings are reserved for signed-in accounts.
Loading...